| Onyx Wireless
ADSL2/2+ Router
802.11g
wireless, 4-port Ethernet
-
FEATURES:
-
ANSI T1.413
Issue 2 compliant; up to 8Mbps downstream and 1Mbps upstream data
rate
-
ITU-T G.992.1
(G.dmt) compliant; up to 8Mbps downstream and 1 Mbps upstream data
rate
-
ITU-T G.992.2
(G.lite) compliant, with splitter less implementation; up to
1.5Mbps downstream and 512kbps upstream data rate
-
ITU-T G.992.5
(ADSL2+) compliant; up to 24Mbps downstream and 2Mbps upstream
data rate
-
Interoperable
with major DSLAMs, including Alcatel, Nokia, Cisco, Siemens,
Fujitsu, Lucent, Stinger, Huawei and ECI
-
Support 8 bits
of VPI and 16 bits of VCI address range
-
Multi-PVC, up
to 16 channels, individually supporting bridged or routing channel
-
Support
RFC2364 (PPP over ATM), RFC2684/1483 multiple protocols over ATM),
RFC1577 (classical IP over ATM) and RFC2516 (PPP over Ethernet),
-
4-port
Ethernet switch, hardware based 10/100BaseT, full/half-duplex,
flow control auto negotiation ; Non-blocking wire speed reception
and transmission
-
User
configuration on interface: telnet and http. Firmware upgrade and
configuration restore over TFTP/Bootp
-
Compliant to
IEEE 802.11g draft and IEEE 802.11b Wireless LAN standards
-
Up to 54Mbps
data rate, nearly five times faster than the current 802.11b
standard of 11Mbps
-
Up to 200m
coverage, 60% further than current IEEE802.11a network
Enhanced
hardware encryption (WEP 64/128/256, AES OCB & AES CCM) and PSK/802.1x
to secure your wireless connection |